Adding a static route on a Speedtouch router

Connected to speedtouch.           
Escape character is '^]'.          
Username : root                    
Password : ********                
------------------------------------------------------------------------

                             ______  SpeedTouch 716
                         ___/_____/\               
                        /         /\  6.2.29.2     
                  _____/__       /  \              
                _/       /\_____/___ \  Copyright (c) 1999-2007, THOMSON
               //       /  \       /\ \                                 
       _______//_______/    \     / _\/______                           
      /      / \       \    /    / /        /\                          
   __/      /   \       \  /    / /        / _\__                       
  / /      /     \_______\/    / /        / /   /\                      
 /_/______/___________________/ /________/ /___/  \                     
 \ \      \    ___________    \ \        \ \   \  /                     
  \_\      \  /          /\    \ \        \ \___\/                      
     \      \/          /  \    \ \        \  /                         
      \_____/          /    \    \ \________\/                          
           /__________/      \    \  /                                  
           \   _____  \      /_____\/                                   
            \ /    /\  \    /___\/                                      
             /____/  \  \  /                                            
             \    \  /___\/                                             
              \____\/                                                   

------------------------------------------------------------------------
_{root}=>ip
{root}[ip]=>rtadd
dst = 172.17.2.0
[dstmsk] = 255.255.255.0
[label] =
[gateway] = 172.16.48.2
[intf] = LocalNetwork
[srcintf] =
[metric] =
:ip rtadd dst=172.17.2.0/24 gateway=172.16.48.2 intf=LocalNetwork
{root}[ip]=>saveall

TIP: backspace in the CLI is Ctrl-H.
Now you are ready to test the new route from your workstation. Using ping on the commandline, you can see the route's effect through the redirect messages (at least on Linux):

root@obelix:~ # ping 172.17.2.91
PING 172.17.2.91 (172.17.2.91) 56(84) bytes of data.
64 bytes from 172.17.2.91: icmp_seq=1 ttl=63 time=1.24 ms
From 172.16.48.254: icmp_seq=1 Redirect Host(New nexthop: 172.16.48.2)

Happy networking!